SANYO DENKI  PEAAI50MXXXC0I伺服驅動器

1.產 品 資 料 介 紹：

 SANYO DENKI   PEAAI50MXXXC0I伺服驅動器 英文資料：

SANYO DENKI PEAAI50MXXXC0I is a medium to high power servo drive with a rated output current of 50A. It is compatible with servo motors ranging from 5.5kW to 7.5kW and focuses on high load drive and stable control. It is suitable for industrial scenarios such as heavy-duty CNC machine tool spindles and metallurgical equipment transmission mechanisms that require high power output and operational stability.

4-8 units of this driver can achieve high-speed collaborative control through EtherCAT industrial bus, driving multi axis heavy-duty execution components on the production line, such as the milling mechanism of a wind turbine gearbox machining line. It can synchronize the cutting speed and feed rate of each axis, ensuring that the precision of the gearbox tooth surface reaches level 6 or above, and the machining pass rate is increased to over 99.3%.

Suitable for three-phase 380V-480V industrial standard power supply, with an allowable range of input voltage fluctuation of ± 15% (323V-552V), it can adapt to large fluctuations in power supply voltage in heavy-duty industrial workshops, without the need for additional high-voltage stabilizing equipment, reducing equipment deployment costs in complex power supply environments.

Adopting a floor standing and modular design, the body protection level reaches IP20. The core driver module and heat dissipation module are independently arranged, and the heat dissipation fan supports intelligent speed regulation (automatically switches speed according to temperature). When running at full load for 24 hours, the body temperature can be controlled below 70 ℃ to avoid high temperature affecting the driving performance.

It is seamlessly compatible with P series high-power servo motors of the same brand (such as P60B18550RBV0), supports the "motor parameter automatic calibration" function, and can automatically identify the motor model, winding parameters, and load the optimal control parameters after power on, avoiding manual debugging errors and shortening the debugging time to less than 40 minutes.

Supports four control modes: position, speed, torque, and torque limit. The pulse response frequency during position control reaches 1MHz. Combined with high-precision electronic cam and gear synchronization function, it can achieve complex trajectory motion control and meet the curve feed requirements during the processing of large shaped parts.

Built in seven protection functions including overcurrent, overvoltage, overload, undervoltage, overheating, encoder failure, and motor stalling. When a fault occurs, the output will be immediately cut off and an audible and visual alarm will be triggered. At the same time, the fault data will be stored in the local memory (which can save nearly 30 fault records). The staff can trace the operating curve of the previous minute through the supporting diagnostic software to quickly locate the root cause of the problem.

 SANYO DENKI  PEAAI50MXXXC0I伺服驅動器 產品展示      

 產品視頻

3.其他產品

FOXBORO RH922VU輸出通信模塊
Woodward 5501-412模擬 I/O 模塊
Emerson VE4036P2冗余串行接口

4.其他英文產品

ABB PHARPS32000000 F8G2B3B6 power module
ABB SM810K01 3BSE030928R1 Bus Interconnection Module
Motorola IPMC761-002 Input/Output Module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218