Extreme Networks EC8404001-E6以太網交換機模塊
1.產 品 資 料 介 紹:
- 專用設備兼容定位:Extreme Networks EC8404001-E6 作為以太網交換機模塊,推測專為 Extreme 特定系列核心或匯聚層交換機(如 EC8400 系列主機,需以官方規格為準)設計,通過標準化插槽安裝,可無縫擴展主機端口數量與類型,無需重構現有網絡架構即可提升設備接入能力。
- 6 口核心業務配置:結合型號中 “E6” 標識及模塊類產品規律,大概率配備 6 個核心以太網端口(推測為千兆電口或 SFP 光口,具體需官方確認),適配服務器、存儲設備或下級交換機的接入需求,平衡端口密度與業務承載能力,滿足中小型網絡分區擴展場景。
- 線速轉發性能支撐:預計采用非阻塞交換架構,交換容量適配 6 個端口的速率需求(若為千兆端口,交換容量或達 12Gbps),轉發速率可實現全端口線速處理,確保數據傳輸無瓶頸,適配企業級文件共享、視頻監控等中高帶寬業務場景。
- 靈活速率與介質適配:若為 SFP 光口設計,可兼容多模(850nm)、單模(1310nm)等不同類型光纖模塊,傳輸距離覆蓋 100m 至 10km 以上;若含電口則支持 10/100/1000Mbps 速率自適應,適配銅纜、光纖等不同布線環境,提升部署靈活性。
- Extreme 系統深度融合:推測兼容 ExtremeOS 操作系統(需以官方版本要求為準),可繼承主機交換機的多層路由(靜態路由、OSPF 等)、VLAN 劃分、QoS 調度等核心功能,確保擴展后網絡功能一致性,避免因模塊接入導致的功能斷層。
- 簡化運維與監控:支持通過主機交換機的統一管理入口(Web 界面、CLI 命令行或 ExtremeCloud IQ 平臺)進行配置與監控,可實時查看模塊端口流量、鏈路狀態及故障告警,配合 SNMP v2/v3 協議,實現模塊與主機的協同運維,降低管理復雜度。
- 高密度擴展優勢:相比獨立交換機,該模塊可在主機單一插槽內提供 6 個業務端口,大幅提升單位空間內的端口密度,尤其適配機房空間有限但接入需求增長的場景,減少設備部署數量,降低機房能耗與運維成本。
Extreme Networks EC8404001-E6以太網交換機模塊 英文資料:
Specialized device compatibility positioning: Extreme Networks EC8404001-E6, as an Ethernet switch module, is speculated to be designed specifically for Extreme specific series core or aggregation layer switches (such as EC8400 series hosts, subject to official specifications). Through standardized slot installation, it can seamlessly expand the number and types of host ports, without the need to reconstruct the existing network architecture to improve device access capabilities.
6-port core business configuration: Based on the "E6" identification in the model and the rules of module products, it is highly likely to be equipped with 6 core Ethernet ports (presumably gigabit electrical ports or SFP optical ports, subject to official confirmation) to adapt to the access requirements of servers, storage devices, or lower level switches, balance port density and business carrying capacity, and meet the needs of small and medium-sized network partition expansion scenarios.
Line speed forwarding performance support: It is expected to adopt a non blocking switching architecture, with a switching capacity that can adapt to the speed requirements of 6 ports (if it is a gigabit port, the switching capacity may reach 12Gbps). The forwarding rate can achieve full port line speed processing, ensuring seamless data transmission and adapting to enterprise level file sharing, video surveillance and other high bandwidth business scenarios.
Flexible speed and medium adaptation: If designed as an SFP optical port, it can be compatible with different types of fiber optic modules such as multimode (850nm) and single-mode (1310nm), with transmission distances covering 100m to 10km or more; If an electrical port is included, it supports 10/100/1000Mbps rate adaptation, adapting to different cabling environments such as copper cables and optical fibers, and improving deployment flexibility.
Deep integration of Extreme system: It is speculated to be compatible with the ExtremeOS operating system (subject to official version requirements), and can inherit core functions such as multi-layer routing (static routing, OSPF, etc.), VLAN partitioning, QoS scheduling, etc. of the host switch, ensuring consistency of network functions after expansion and avoiding functional gaps caused by module access.
Simplified operation and monitoring: Supports configuration and monitoring through the unified management portal of the host switch (web interface, CLI command line, or ExtremeCloud IQ platform), allowing real-time viewing of module port traffic, link status, and fault alarms. Combined with SNMP v2/v3 protocol, it achieves collaborative operation and maintenance between modules and hosts, reducing management complexity.
Advantages of high-density expansion: Compared with independent switches, this module can provide 6 business ports in a single slot of the host, greatly increasing the port density per unit space, especially suitable for scenarios where the data center space is limited but the access demand is increasing, reducing the number of device deployments and lowering the energy consumption and operation costs of the data center.
Extreme Networks EC8404001-E6以太網交換機模塊 產品展示

產品視頻
3.其他產品
Alcatel-Lucent 3DH03131AAAG控制板
Alcatel-Lucent 3FE66721AB VAI2AK7NAA端口板
Alcatel-Lucent AE-37Y-2 - MDR8000控制器模塊板
4.其他英文產品
B&R 8V1090.00-1 Digital Input Module
B&R 8V1045.00-2 thyristor module
B&R 8V1010.00-2 Digital Input Module
| AMAT 0190-04397 | AMAT 0190-33211 | AMAT 0190-24145 |
| AMAT 0190-04457 | AMAT 0190-33293 | AMAT 0190-24232 |
| AMAT 0190-04585 | AMAT 0190-33452 | AMAT 0190-24298 |
| AMAT 0190-04608 | AMAT 0190-33532 | AMAT 0190-24445 |
| AMAT 0190-04679 | AMAT 0190-33634 | AMAT 0190-24476 |
| AMAT 0190-04681 | AMAT 0190-33704 | AMAT 0190-24484 |
| AMAT 0190-04703 | AMAT 0190-34165 | AMAT 0190-24676 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218


