Extreme Networks X870-32C-Base基礎交換機
1.產 品 資 料 介 紹：
- Extreme Networks X870-32C-Base 定位高端基礎款核心交換機，核心配置為 32 個 25GbE SFP28 高速端口，主打 “高密度高速接入 + 極簡部署”，適配中型數據中心、大型園區網核心層的基礎高帶寬組網需求。
- 32 個 25GbE SFP28 端口均支持線速轉發，單端口帶寬達 25Gbps，總帶寬可輕松承載服務器集群、萬兆無線 AP 陣列的高速接入，相比傳統 10GbE 核心交換機，單端口帶寬提升 2.5 倍，適配 AI 推理、高清視頻流等帶寬密集型業務。
- 作為 X870 系列的基礎款，保留核心擴展能力，機身預留 2 個 40GbE QSFP + 上行端口，可通過多模 / 單模光模塊實現與超核心交換機的 40G 高速互聯，避免 32 個 25GbE 端口并發時的上行帶寬瓶頸。
- 深度適配 ExtremeXOS 基礎版操作系統，聚焦核心轉發功能的穩定性，支持 VLAN 劃分、LACP 鏈路聚合、RSTP/MSTP 生成樹等基礎協議，同時兼容 ExtremeCloud IQ 基礎監控功能，滿足中小型核心網絡的管理需求。
- 采用無阻塞硬件架構，背板帶寬達 1.28Tbps，包轉發率 960Mpps，完全匹配 32×25GbE+2×40GbE 端口的滿負載線速轉發需求，數據傳輸延遲控制在微秒級，保障業務低延遲響應。
- 端口兼容性靈活，25GbE SFP28 端口可向下兼容 10GbE SFP + 模塊，無需更換端口即可對接既有 10GbE 服務器、存儲設備，幫助企業平滑過渡至 25G 網絡，保護既有硬件投資。
- 硬件設計兼顧可靠性與實用性，采用 1RU 機架式結構，配備雙冗余風扇（支持熱插拔）與單電源（可選配冗余電源模塊），支持 7×24 小時不間斷運行，適配機房基礎高可用場景。
- 集成基礎安全防護體系，支持 802.1X 身份認證、MAC 地址綁定、端口安全及 ACL 訪問控制列表，可過濾非法流量、防止未授權設備接入，為核心網絡筑牢基礎安全防線。
- 管理方式簡潔高效，除本地 Web 圖形界面、CLI 命令行外，可接入 ExtremeCloud IQ 平臺實現端口狀態監控、流量統計與固件升級，無需部署復雜管理服務器，降低中小團隊運維門檻。
Extreme Networks X870-32C-Base基礎交換機 英文資料：
Extreme Networks X870-32C Base is positioned as a high-end basic core switch, with a core configuration of 32 25GbE SFP28 high-speed ports. It focuses on "high-density high-speed access+minimalist deployment" and is suitable for the basic high bandwidth networking needs of medium-sized data centers and large campus network core layers.
All 32 25GbE SFP28 ports support line speed forwarding, with a single port bandwidth of up to 25Gbps. The total bandwidth can easily support high-speed access to server clusters and 10G wireless AP arrays. Compared to traditional 10GbE core switches, the single port bandwidth is increased by 2.5 times, making it suitable for bandwidth intensive services such as AI inference and high-definition video streaming.
As the basic model of the X870 series, it retains core expansion capabilities and reserves 2 40GbE QSFP+upstream ports on the body. It can achieve 40G high-speed interconnection with the ultra core switch through multi-mode/single-mode optical modules, avoiding the upstream bandwidth bottleneck when 32 25GbE ports are concurrent.
Deeply adapted to the ExtremeXOS basic version operating system, focusing on the stability of core forwarding functions, supporting basic protocols such as VLAN partitioning, LACP link aggregation, RSTP/MSTP spanning trees, and compatible with ExtremeCloud IQ basic monitoring functions to meet the management needs of small and medium-sized core networks.
Adopting a non blocking hardware architecture, the backplane bandwidth reaches 1.28Tbps, the packet forwarding rate is 960Mpps, fully matching the full load line speed forwarding requirements of 32 × 25GbE+2 × 40GbE ports, and the data transmission delay is controlled at the microsecond level to ensure low latency response for business.
Flexible port compatibility, the 25GbE SFP28 port is backward compatible with 10GbE SFP+modules, allowing for seamless integration with existing 10GbE servers and storage devices without the need to ｒｅｐｌａｃｅ ports, helping enterprises smoothly transition to 25G networks and protect existing hardware investments.
The hardware design balances reliability and practicality, adopting a 1RU rack mounted structure, equipped with dual redundant fans (supporting hot swapping) and a single power supply (optional redundant power module), supporting 7 × 24-hour uninterrupted operation, and suitable for high availability scenarios in the data center.
Integrated basic security protection system, supporting 802.1X identity authentication, MAC address binding, port security, and ACL access control list, can filter illegal traffic, prevent unauthorized device access, and build a solid foundation of security defense for the core network.
The management method is simple and efficient. In addition to the local web graphical interface and CLI command line, it can be connected to the ExtremeCloud IQ platform to achieve port status monitoring, traffic statistics, and firmware upgrades, without the need to deploy complex management servers, reducing the operational threshold for small and medium-sized teams.
Extreme Networks X870-32C-Base基礎交換機 產品展示
產品視頻
3.其他產品
GXD-Q18P斷路器
EC5525PPAP傳感器
PKZM0-16-T電機斷路器
4.其他英文產品
NI PXI-5421 regulator module
NI PXI-4072 Industrial Control Card Module
NI PXI-7953R controller module
| PMB33E-00114-01 | NKLS112 | PFCL301E 1.0KN 3BSE016580R1000 |
| PMB33E-00114-00 | AMAT 0100-00011 | N32HSHK-LNK-NS-02 |
| PMB33E-00101-03 | AMAT 0100-11000 | KT 8991a |
| PMB33E-00101-02 | NICS01 | P22NRXD-LNN-NS-02 |
| PMB33E-00101-01 | IIMKM01 | EHDB130 |
| PMB33E-00101-00 | 07AS82 | N42HCLM-LNK-NS-00 |
| PMB33E-00100-03 | 07BT62R1 | P21NSXC-LNN-NS-02 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
