Motorola MVME2431輸入輸出模塊

1.產 品 資 料 介 紹：

Motorola MVME2431 VMEbus 輸入 / 輸出（I/O）模塊解析

一、核心技術特性

1. 多類型 I/O 集成：覆蓋數字與模擬場景

（1）數字量 I/O（DI/DO）：高可靠開關信號交互

• 數字輸入（DI）：典型支持 16-32 路獨立 DI 通道，輸入電平兼容 TTL（5V）/ 工業干接點（24V/48V），可直接連接限位開關、光電傳感器、按鈕等設備，采集 “設備到位”“故障告警” 等開關狀態；
  • 部分通道支持 邊緣觸發中斷（上升沿 / 下降沿可配置），當外部信號狀態突變時（如急停按鈕按下），主動向 CPU 發送中斷請求，避免 CPU 輪詢占用資源，中斷響應延遲≤10μs；
• 數字輸出（DO）：典型支持 8-16 路獨立 DO 通道，輸出類型為 集電極開路 / 推挽輸出，每路最大驅動電流 500mA-1A，可直接驅動繼電器、電磁閥、指示燈等執行器，實現 “電機啟?！薄伴y門開關” 等控制動作；
  • 輸出端集成 過流保護與短路保護，當負載短路或過流時（如繼電器線圈粘連），模塊自動切斷輸出電流（保護閾值可通過軟件配置），故障排除后可手動 / 自動恢復，避免硬件燒毀。

（2）模擬量 I/O（AI/AO，可選配置）：高精度連續量處理

• 模擬輸入（AI）：可選 4-8 路差分 / 單端 AI 通道，分辨率 12-16 位（16 位版本精度 ±0.01%），輸入量程支持 ±5V/±10V/0-20mA/4-20mA，可采集溫度（通過熱電偶 / PT100 變送器）、壓力、流量等連續變化的物理量；
  • 集成 信號調理電路（濾波、放大），抑制工業現場的電磁干擾（如電機啟停浪涌），采樣速率最高 1kHz / 通道，滿足實時監控需求（如化工反應釜溫度實時采集）；
• 模擬輸出（AO）：可選 2-4 路 AO 通道，分辨率 12-16 位，輸出量程支持 ±5V/±10V/4-20mA，可驅動伺服驅動器、調節閥、模擬量執行器，實現 “轉速連續調節”“閥門開度控制” 等精準輸出；
  • 支持 輸出值保持功能，當模塊與 CPU 通信中斷時，可保持當前輸出值（如維持閥門開度），避免系統失控。

Motorola MVME2431輸入輸出模塊 英文資料：

Analysis of Motorola MVME2431 VMEbus Input/Output (I/O) Module

The Motorola MVME2431 is an industrial grade multifunctional I/O module based on the VMEbus architecture, positioned as the "I/O expansion hub" of MVME systems. By integrating digital input/output (DI/DO), optional analog input/output (AI/AO), and programmable control logic, it provides an integrated "digital+analog" signal interaction capability for MVME series CPU modules (such as MVME162, MVME2301), suitable for industrial automation, machine tool control, power monitoring, and other scenarios that require simultaneous processing of switch signals and continuous signals. It is a key expansion component for building a complete embedded control system.

1、 Core technical characteristics

1. Multi type I/O integration: covering both digital and analog scenarios

The core advantage of MVME2431 lies in its "multifunctional integration", which can simultaneously process digital switch signals and analog continuous signals without additional expansion, adapting to complex industrial control requirements:

(1) Digital I/O (DI/DO): High reliability switch signal interaction

Digital Input (DI): Typically supports 16-32 independent DI channels, with input levels compatible with TTL (5V)/industrial dry contacts (24V/48V). It can be directly connected to limit switches, photoelectric sensors, buttons, and other devices to collect switch statuses such as "device in place" and "fault alarm";

Some channels support edge triggered interrupts (with configurable rising/falling edges). When the external signal state suddenly changes (such as pressing the emergency stop button), it actively sends interrupt requests to the CPU to avoid CPU polling and resource consumption. The interrupt response delay is ≤ 10 μ s;

Digital Output (DO): Typically supports 8-16 independent DO channels, with output types of open collector/push-pull output. Each channel has a maximum driving current of 500mA-1A and can directly drive relays, solenoid valves, indicator lights, and other actuators to achieve control actions such as "motor start stop" and "valve switch";

The output end integrates overcurrent protection and short-circuit protection. When the load is short circuited or overcurrent (such as relay coil adhesion), the module automatically cuts off the output current (the protection threshold can be configured through software). After troubleshooting, it can be manually/automatically restored to avoid hardware burnout.

(2) Analog I/O (AI/AO, optional configuration): high-precision continuous processing

Analog Input (AI): 4-8 differential/single ended AI channels can be selected, with a resolution of 12-16 bits (16 bit version accuracy ± 0.01%). The input range supports ± 5V/± 10V/0-20mA/4-20mA, and can collect continuously changing physical quantities such as temperature (through thermocouple/PT100 transmitter), pressure, flow rate, etc;

  Motorola MVME2431輸入輸出模塊 產      品      展      示      

 產品視頻

3.其他產品

AMAT 0190-17056驅動器
WOODWARD 5466-409邏輯控制器模塊
MKS 660-072825-200伺服驅動器

4.其他英文產品

VT-HNC100-1-23/W-08-P-0 R900958999 Driver module
HIMA F7126 Power supply module
HIMA F7131 processor card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218