AMAT Applied Materials 0010-30708分析電源組件
1.產 品 資 料 介 紹：
類別 | 規格 |
輸出特性 | 3 路獨立輸出（5V/12V/24V DC），總功率≤100W |
精度等級 | 輸出電壓 ±0.1% FS，紋波≤10mVpp |
保護功能 | 過壓保護（1.1 倍額定電壓）、過流保護（1.2 倍額定電流） |
環境適配 | 0-55℃、IP40、抗電磁干擾（EN 61000-6-2） |
兼容性 | 兼容 AMAT 0190-09445 檢測器、分析設備主控模塊 |
- 分析設備供電：為刻蝕后晶圓成分分析的質譜儀提供低紋波電源，保障檢測數據精度。
- 檢測模塊賦能：為光譜儀光源驅動電路、信號放大模塊供電，穩定設備運行狀態。
- 安全供電管控：當分析模塊短路時，快速切斷輸出，避免損壞精密分析元件。
- 安裝：固定于分析設備電控單元，電源線采用屏蔽線纜，接地電阻≤0.5Ω。
- 維護：每 3 個月清潔散熱孔，每 6 個月校準輸出精度，故障優先排查輸出端接線虛接 / 短路。
- 采購：優先選原廠供應商（如長欣自動化），到貨驗證輸出精度報告與序列號溯源。
AMAT Applied Materials 0010-30708分析電源組件 英文資料：
1、 Core positioning
AMAT 0010-30708 is the "high-precision power supply core" of semiconductor analysis and detection equipment, designed to provide stable DC power for analysis modules such as mass spectrometers and spectrometers. It also has real-time voltage/current monitoring and overvoltage/overcurrent protection functions, and is suitable for Class 10 clean environments and low ripple power supply requirements of analysis equipment.
2、 Key parameters
Category
Specifications
Output characteristics
3 independent outputs (5V/12V/24V DC), total power ≤ 100W
Accuracy level
Output voltage ± 0.1% FS, ripple ≤ 10mVpp
Protection function
Overvoltage protection (1.1 times rated voltage), overcurrent protection (1.2 times rated current)
Environmental adaptation
0-55 ℃ IP40、 Anti electromagnetic interference (EN 61000-6-2)
Compatibility
Compatible with AMAT 0190-09445 detector and analysis equipment main control module
3、 Core applications
Power supply for analysis equipment: Provide low ripple power supply for mass spectrometer for analyzing the composition of etched wafers, ensuring the accuracy of detection data.
Empowering the detection module: supplying power to the spectrometer light source drive circuit and signal amplification module to stabilize the equipment operation status.
Safe power supply control: When the analysis module is short circuited, quickly cut off the output to avoid damaging the precision analysis components.
4、 Key points of operation and maintenance
Installation: Fixed to the electronic control unit of the analysis equipment, the power cord adopts shielded cable, and the grounding resistance is ≤ 0.5 Ω.
Maintenance: Clean the heat dissipation holes every 3 months, calibrate the output accuracy every 6 months, and prioritize troubleshooting for loose connections/short circuits in the output terminal wiring.
Procurement: Prioritize the selection of original suppliers (such as Changxin Automation), and verify the accuracy report and serial number traceability upon arrival.
5、 Technical value
High precision and low ripple output ensure the accuracy of analysis data, multiple protections reduce equipment failures, compatible with multiple analysis modules, and reduce the complexity of system power supply solutions.
AMAT Applied Materials 0010-30708分析電源組件 產品展示
產品視頻
3.其他產品
Zygo 1115-801-346 激光頭電纜
INDRAMAT TVM2.4-050-220/300-W1 電源模塊
BENTLY? 3500/92?133323-01 繼電器模塊
4.其他英文產品
METSO PDP403 logical unit module
METSO PDP601 output unit module
469-P5-HI-A20-E-H Relay module
| 6ES5701-0LA11 | CACR-10-101010F | OP1W03-0-0 |
| 6ES5700-8MA11 | CACR-SR05SB1AFY187 | OP945G |
| 6ES5700-2LA22 | CACR-SR15BC1FS | Asyst 4269-02-16000011 |
| 6ES5696-3AA21 | CACR-IR15SE | Asyst 3200-4310-02 |
| 6ES5581-5LA11 | CACR-CSL15AAAY30 | Asyst 3200-1071-02 6018-1002-10B |
| 6ES5581-1EE15 | CACR-SR30SF1BSB-Y1 | ASYST 3000-1086-04A |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
