ALCATEL LUCENT  3AL78835AAAB 警報接口卡

1.產 品 資 料 介 紹：

中文資料：

ALCATEL LUCENT 3AL78835AAAB
警報接口卡 / Alarm Interface Card

產品概述：

3AL78835AAAB 是 Alcatel-Lucent 通信系統中的一款專用警報接口卡模塊，主要功能是將通信設備或系統中的告警信號進行采集、管理并通過標準接口輸出，供系統監控平臺（如網管系統）進行告警處理、記錄與響應。

該模塊通常安裝在網絡核心設備或接入設備中，與電源、處理器、交換板等其他關鍵模塊協同工作，提供硬件級別的運行狀態監控與故障告警接口。

核心功能特點：

• ? 多通道告警輸入輸出接口：支持多路干接點信號輸入與輸出，可靈活配置觸發條件。

• ? 狀態指示與自診斷功能：板卡自帶 LED 指示燈，用于顯示各通道告警狀態。

• ? 與系統聯動：能與主控模塊、管理軟件協同工作，實現自動告警報告與日志記錄。

• ? 標準電氣接口：通常提供標準告警信號接口（如 DB25、RJ45 或端子排），便于與上層系統連接。

• ? 穩定可靠，工業級設計：滿足電信級運行環境要求，適用于高可靠性場景。

典型應用領域：

1. 電信交換系統

   • 實時監測主控板、電源模塊、風扇、電纜等組件的狀態，一旦異常立即發出告警。

2. 傳輸系統（如光傳輸、SDH/SONET）

   • 用于監測光模塊、收發器、電源冗余、電纜連接情況。

3. 基站與接入設備

   • 在無線或有線接入設備中監控機柜門禁、電源狀態、風扇運行、UPS 狀況等。

4. 網絡管理系統對接

   • 將告警信號通過接口傳遞給上層 NMS（Network Management System）進行集中告警管理。

5. 工業通信和數據中心

   • 用于對關鍵環境變量進行告警檢測，如溫度異常、電壓波動、設備斷電等。

英文資料：

ALCATEL LUCENT 3AL78835AAAB

Alarm Interface Card

Product Overview:

3AL78835AAAB is a dedicated alarm interface card module in Alcatel Lucent communication systems. Its main function is to collect, manage, and output alarm signals from communication devices or systems through standard interfaces for system monitoring platforms (such as network management systems) to process, record, and respond to alarms.

This module is usually installed in network core devices or access devices, working in conjunction with other key modules such as power supply, processor, and switch board to provide hardware level operation status monitoring and fault alarm interfaces.

Core functional features:

?  Multi channel alarm input/output interface: supports multiple dry contact signal input and output, and can flexibly configure triggering conditions.

?  Status indication and self diagnostic function: The board comes with LED indicator lights to display the alarm status of each channel.

?  Linkage with the system: It can work together with the main control module and management software to achieve automatic alarm reporting and log recording.

?  Standard electrical interface: usually provides standard alarm signal interfaces (such as DB25, RJ45, or terminal block) for easy connection with upper level systems.

?  Stable and reliable, industrial grade design: meets the requirements of telecommunications grade operating environment, suitable for high reliability scenarios.

Typical application areas:

telecommunication switching system

Real time monitoring of the status of components such as the main control board, power module, fan, cables, etc., and issuing alarms immediately in case of abnormalities.

Transmission systems (such as optical transmission, SDH/SONET)

Used for monitoring optical modules, transceivers, power redundancy, and cable connections.

Base station and access equipment

Monitor cabinet access control, power status, fan operation, UPS status, etc. in wireless or wired access devices.

Network management system integration

Transmit the alarm signal to the upper layer NMS (Network Management System) through the interface for centralized alarm management.

Industrial Communication and Data Center

Used for alarm detection of key environmental variables, such as temperature anomalies, voltage fluctuations, equipment power outages, etc.

2.產      品      展      示      

3.其他產品

XV-440-10TVB-1-50 觸摸屏

NI ?PCI4451 數據采集卡

FOXBORO RH926GH 控制輸入卡

4.其他英文產品

IC3650SGDB1 control board

ASEA 2668 180-291 slot control

ABB P8226 relay module