Pepperl+Fuchs  KFU8-DWB-1.D電壓保護器

1.產 品 資 料 介 紹：

中文資料：

Pepperl+Fuchs KFU8-DWB-1.D 是一款單通道速度監測信號調理器，適用于檢測超速或欠速情況，廣泛應用于工業自動化領域。以下是其主要特點：

主要特性

• 電源范圍：支持 2090V DC 或 48253V AC，適用于不同電源環境。
• 輸入類型：兼容干接點或 NAMUR 傳感器，輸入頻率范圍為 1 mHz 至 12 kHz。
• 輸出功能：配備兩個繼電器輸出，可用于報警指示或控制。
• 啟動覆蓋：允許在啟動期間設置繼電器狀態，最長可達 1000 秒。
• 前面板配置：通過設備前部的鍵盤進行參數調整，操作便捷。
• 線路故障檢測 (LFD)：監測線路狀態，確保系統安全性。
• 安全等級：符合 IEC/EN 61508 和 IEC/EN 61511 標準，達到 SIL 2 級安全完整性等級。

這款設備適用于需要對旋轉速度或運動狀態進行監測的工業場景，如電機、輸送帶、風機等應用。

英文資料：

Pepperl+Fuchs KFU8-DWB-1D is a single channel speed monitoring signal conditioner suitable for detecting overspeed or underspeed situations, widely used in the field of industrial automation. The following are its main characteristics:

Main characteristics

Power range: Supports 2090V DC or 48253V AC, suitable for different power environments.

Input type: compatible with dry contacts or NAMUR sensors, with an input frequency range of 1 mHz to 12 kHz.

Output function: Equipped with two relay outputs, it can be used for alarm indication or control.

Startup Coverage: Allow relay status to be set during startup for up to 1000 seconds.

Front panel configuration: Parameter adjustment can be made through the keyboard on the front of the device, making it easy to operate.

Line Fault Detection (LFD): Monitor the status of the line to ensure system safety.

Safety level: Compliant with IEC/EN 61508 and IEC/EN 61511 standards, reaching SIL 2 safety integrity level.

This device is suitable for industrial scenarios that require monitoring of rotational speed or motion status, such as motors, conveyor belts, fans, and other applications.

2.產      品      展      示      

3.其他產品

BENDER IRDH375B-435 絕緣檢測儀

BECKHOFF CX11000001 直流調速器

BECKHOFF CX1020N000控制器

4.其他英文產品

Asea 2668 170-3 Pcb Circuit Board

RADISYS 061-01450-0010 Network Adapter

ABB XVC768115 thyristor module