AMAT Applied Materials  0190-09468傳感器總線

1.產 品 資 料 介 紹：

核心規(guī)格

結構與原理

1. 主控單元：負責協(xié)議轉換與數(shù)據處理。
2. 隔離電路：每路傳感器信號與總線之間均有電氣隔離，增強抗干擾能力。
3. 傳感器接口：支持標準 4?20 mA、0?10 V 或數(shù)字量傳感器。
4. 總線接口：通過 RJ45 連接至設備 PLC 或上位機，支持熱插拔。
5. 配置方式：通過模塊按鍵或上位機軟件設置地址、波特率、傳感器類型。

AMAT Applied Materials  0190-09468傳感器總線 英文資料：

AMAT 0190-09468 is a multi-channel serial sensor bus module customized by Applied Materials Company, used for centralized data acquisition and transmission of temperature, pressure, flow and other sensors in wafer manufacturing equipment. It supports RS-485/RS-422 protocol and can be extended to up to 32 sensor nodes with a transmission rate of 9.6 kbps~115.2 kbps and a protection level of IP20. It is suitable for process monitoring systems of Centura, Endura and other devices.

Core specifications

Project Specification Description

Functional positioning sensor data acquisition and bus transmission compatible with multiple industrial standard sensors

Communication protocol RS-485/RS-422 optional supports multi-point bus topology, with strong anti-interference ability

The maximum number of channels is 32, and each channel can independently configure sensor types

Transmission rate of 9.6 kbps~115.2 kbps can be configured through software, default is 19.2 kbps

Working voltage DC 24V ± 10%, typical power consumption ≤ 5W

Recommended for use in semiconductor workshop environments with working temperatures ranging from 0 ℃ to 50 ℃

Interface type sensor: M8 × 1 4-pin; Bus: RJ45 for easy plug and play and maintenance

Material and protective shell: ABS+PC; Protection level: IP20 dust proof, suitable for installation inside electrical control boxes

Size and installation: 100 × 70 × 30mm, 35mm rail or M4 screw compatible with AMAT standard electrical control box

Structure and Principle

This module consists of a main control unit, isolation circuit, multiple sensor interfaces, and bus interface

Main control unit: responsible for protocol conversion and data processing.

Isolation circuit: Each sensor signal is electrically isolated from the bus to enhance anti-interference capability.

Sensor interface: Supports standard 4-20 mA, 0-10 V, or digital sensors.

Bus interface: Connected to the device PLC or upper computer through RJ45, supporting hot swapping.

Configuration method: Set the address, baud rate, and sensor type through module buttons or upper computer software.

 AMAT Applied Materials  0190-09468傳感器總線 產品展示      

 產品視頻

3.其他產品

Sanyo P30B06010DXS8SM? 交流電伺服電機
NI PXIE-8135 嵌入式控制器
SCHNEIDER BMXDD16402K 邏輯控制器模塊

4.其他英文產品

ICS TRIPLEX T9432 Programmable module
ICS TRIPLEX T9451 Channel module
TP852 3BSC950263R1 base module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218