ALCATEL LUCENT 3BA53188ABFD模擬板
1.產 品 資 料 介 紹：
中文資料：
ALCATEL-LUCENT 3BA53188ABFD 模擬板 是一款用于電信網絡基礎設施中的關鍵組件，主要用于信號處理和系統接口。雖然官方公開資料較少，但根據 ALCATEL-LUCENT 產品的命名規范和類似產品推測，該模擬板可能屬于其 交換設備、傳輸設備或基站控制系統中的一部分。
產品應用領域概述：
1. 電信交換系統（Telecom Switching Systems）
在傳統或混合交換系統中，實現模擬語音信號與數字系統之間的轉換。
用于支持 PSTN（公共交換電話網絡）與 VoIP（網絡語音協議）之間的接口。
2. 移動通信基站（Base Transceiver Station, BTS）
在 GSM、UMTS 或 LTE 網絡中，模擬板可能負責處理模擬語音信號或控制信號。
用于無線接入網絡中基站控制器（BSC）或射頻模塊間的信號轉換。
3. 傳輸設備（Transmission Systems）
在 SDH/PDH 等光纖傳輸系統中，用于電接口與光接口之間的信號轉換。
支持遠程站點或邊緣設備的模擬輸入/輸出（I/O）。
4. 企業級語音網關或PBX系統
用于傳統企業通信系統中，作為模擬線路與數字主干之間的橋梁。
支持模擬電話（FXO/FXS 接口）接入數字語音網絡。
5. 遠程控制與監控系統
如果設計中包含模擬信號采集功能，也可用于遠程監控站、信號測量點等工業通信場景。
英文資料：
ALCATEL-LUCENT 3BA53188ABFD analog board is a key component used in telecommunications network infrastructure, mainly for signal processing and system interfaces. Although there is relatively little official public information, based on the naming conventions of ALCATEL-LUCENT products and similar products, it is speculated that the analog board may be part of its switching equipment, transmission equipment, or base station control system.
Overview of Product Application Fields:
1. Telecom Switching Systems
In traditional or hybrid switching systems, the conversion between analog speech signals and digital systems is achieved.
Used to support the interface between PSTN (Public Switched Telephone Network) and VoIP (Voice over Internet Protocol).
2. Base Transceiver Station (BTS) for mobile communication
In GSM, UMTS, or LTE networks, the analog board may be responsible for processing analog voice signals or control signals.
Used for signal conversion between base station controllers (BSC) or radio frequency modules in wireless access networks.
3. Transmission Systems
In fiber optic transmission systems such as SDH/PDH, it is used for signal conversion between electrical interfaces and optical interfaces.
Supports analog input/output (I/O) for remote sites or edge devices.
4. Enterprise level voice gateway or PBX system
Used as a bridge between analog lines and digital backbone in traditional enterprise communication systems.
Supports analog telephone (FXO/FXS interface) access to digital voice networks.
5. Remote control and monitoring system
If the design includes analog signal acquisition function, it can also be used in industrial communication scenarios such as remote monitoring stations and signal measurement points.
2.產 品 展 示
3.其他產品
4.其他英文產品
HAAS 93-32-3550J Intelligent Driver
ABB XXD129A01 Card Module Controller
AMAT 0190-66253 Communication Module
| VT 3002-1-2X/48F | 6DD1681-0GA0 | ics triplex t7310 |
| VC3640-450-1-56C | SC453-017-05 | SC953TN-501-01 |
| VC3640-449-1-48C | SC452-017-05 | SC903-050-01 |
| VC3640-419-1-56C | SC453-037-15 | SC933AN-001-01 |
| VC3640-405-1-56D | SC453-011-05 | SC904-001-01 |
| VC3640-405-1-48C | SC453-029-06 | SC904AN-001-01 |
| VC3640-278-1-48C | SC452-012-05 | SC933AN-050-01 |
