Motorola MVME332 01-W3504B-01D數字量控制板卡
1.產 品 資 料 介 紹:
- 數字量輸入通道配置
- 通道數量:推測配備 16~32 路獨立數字量輸入通道,支持單端輸入模式,可同時采集多臺外部設備的開關狀態(如傳感器觸發信號、設備運行狀態信號),滿足中小型控制系統的多節點監測需求(如 16 路生產線設備的運行狀態同步采集)。
- 輸入信號類型:支持 TTL/CMOS 電平信號輸入(典型高電平 3.3V~5V,低電平 0V~0.8V),部分通道可能兼容干接點信號(如繼電器觸點、限位開關觸點),無需額外電平轉換電路即可直接連接工業現場常見的開關類設備,簡化硬件接線。
- 隔離與保護:輸入通道采用光電隔離設計,隔離電壓通常為 2500Vrms,有效阻斷外部電路的干擾信號與電壓波動對板卡內部電路的影響;同時配備過壓保護電路(如 TVS 瞬態抑制二極管),可抵御輸入信號端的瞬間高壓沖擊(如雷擊感應電壓),防止通道損壞。
- 采集速率:?jiǎn)瓮ǖ雷罡卟杉俾士蛇_(dá) 1kHz~10kHz,支持批量采集與中斷觸發采集模式,批量采集適用于周期性狀態監測(如每秒采集一次設備運行狀態),中斷觸發采集可快速響應外部信號變化(如傳感器觸發時立即采集信號),滿足不同場景的實時性需求。
Motorola MVME332 01-W3504B-01D數字量控制板卡 英文資料:
Introduction to Motorola MVME332 01-W3504B-01D Digital Control Board
The Motorola MVME332 01-W3504B-01D digital control board is a specialized board in the MVME series that focuses on digital signal acquisition and control. It is designed based on the VME bus architecture and widely used in industrial automation, equipment control, and embedded systems. It has the core characteristics of "high reliability, multi-channel control, and flexible adaptation", integrating rich digital input/output channels and perfect control logic. It can accurately process switch signals in industrial sites, achieve start stop control, status monitoring, and fault alarm of external devices. It is an important hardware component for Motorola to adapt to small and medium-sized embedded systems in the field of digital control.
1、 Product Overview
The Motorola MVME332 01-W3504B-01D digital quantity control board is positioned in the mid-range digital quantity control market, focusing on solving the core requirement of "efficient control of multi-channel digital signals" in industrial scenarios. Its hardware architecture is built around high-performance digital processing chips, and through optimized signal isolation circuits, configurable I/O channel design, and deep compatibility with the VME bus standard, it achieves closed-loop management of "acquisition control feedback" - it can meet the real-time monitoring requirements of multiple device switch states in industrial production lines, equipment control cabinets, and other scenarios, and accurately issue control instructions through independent digital output channels. It is also compatible with MVME series controller modules (such as MVME162-222), reducing system integration difficulty and development costs.
This product fully considers the complex working conditions of industrial sites in its design, using industrial grade components, optoelectronic isolation technology, and anti electromagnetic interference circuits. It can withstand a certain range of temperature fluctuations (usually supporting a wide temperature range of -20 ℃~+70 ℃), voltage surges, and electromagnetic interference. It is suitable for digital control scenarios that require long-term stable operation, such as industrial equipment switch control, production line status monitoring, security system linkage control, etc. It can effectively ensure the accuracy of digital signal transmission and the reliability of control instruction execution.
2、 Technical Parameters (Based on MVME Series Characteristics and Universal Design Speculation of Digital Control Board)
Digital input channel configuration
Number of channels: It is estimated to be equipped with 16~32 independent digital input channels, supporting single ended input mode, which can simultaneously collect the switch status of multiple external devices (such as sensor trigger signals and equipment operation status signals), meeting the multi node monitoring needs of small and medium-sized control systems (such as synchronous collection of operation status of 16 production line equipment).
Input signal type: Supports TTL/CMOS level signal input (typical high level 3.3V~5V, low level 0V~0.8V), some channels may be compatible with dry contact signals (such as relay contacts, limit switch contacts), and can be directly connected to common switch devices in industrial fields without the need for additional level conversion circuits
Motorola MVME332 01-W3504B-01D數字量控制板卡 產品展示

產品視頻
3.其他產品
Agilent HP5517B激光頭
UNITROL 1020-0006 FULL 3BHE030579R0006控制器
UNITROL6080 3ADT218437R0002激勵驅動器
4.其他英文產品
DSRF180A 57310255-AV Control framework
DSSB140 48980001-P Logic control card
DSTC175 57310001-KN Automation module
| 369-HI-0-M-F-E-0 | 531X305NTBAEG1 | IC3603A177CG5 |
| 369-HI-0-M-0-0-E | SS2000-PCI | IC3603A177CF6 |
| 369-HI-0-M-0-0 | 531X301DCCAJM1 | IC3603A177AH9 |
| 369-HI-0-B-F-D-0-E | 531X301DCCAHM1 | IC3603A177AH2 |
| 369-HI-0-B-0-0-0-0 | 531X301DCCADM1 | IC3603A177AG9 |
| 369-HI-0-0-0-0 | 531X300CCHBDM3 | IC3603A177AG2 |
| 36-0201 | 531X300CCHAXM3 | IMDSI14 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218




