SANYO DENKI QS1L03LJ0YP26B伺服控制器
1.產 品 資 料 介 紹：
- 核心定位：SANYO DENKI QS1L03LJ0YP26B 是小功率伺服控制器，主打輕量化與精準控制，為同功率段伺服電機提供穩定驅動信號，適配緊湊型自動化設備的動力控制需求。
- 功率適配：從型號 “03” 推測，適配額定功率約 0.3kW 的伺服電機，適合驅動輕載部件，如微型傳動模組、精密儀器執行機構、小型自動化設備驅動單元等。
- 控制模式：支持位置、速度兩種基礎控制模式，可通過參數靈活切換，滿足輕載設備的精準定位（如元件抓取對位）與恒速運行（如低速輸送）需求。
- 供電規格：預計兼容 AC 100-240V 寬電壓輸入，無需改造常規工業供電回路，適配不同區域車間用電環境，降低系統布線難度。
- 信號交互：支持脈沖指令輸入（如脈沖 + 方向、CW/CCW），能接收 PLC 或運動控制器的控制信號，同時反饋電機運行狀態（如轉速、故障信號），實現基礎閉環控制。
- 保護功能：具備過流、過壓、欠壓、過熱及電機過載保護，異常時自動切斷輸出，避免控制器與電機因故障損壞，提升設備運行安全性。
- 適配電機：建議搭配 SANYO DENKI 同功率段小伺服電機（如 Q 系列、P 系列低功率型號），參數預設匹配，減少調試工作量，降低兼容風險。
- 結構特點：采用緊湊式設計，體積小巧，可嵌入設備控制柜狹小空間，或與電機就近安裝，縮短接線距離，減少信號干擾，優化設備布局。
- 典型應用：用于電子元件組裝機（如微型貼片機構）、精密檢測儀器（如傳感器驅動單元）、小型醫療設備（如樣本處理傳動）、輕載輸送線（如微型零件傳輸）等場景。
- 使用價值：相比通用控制器，體積更小、能耗更低，且與同品牌電機適配性強，能簡化輕載自動化系統集成，降低設備整體成本，同時保障驅動精度與穩定性。
SANYO DENKI QS1L03LJ0YP26B伺服控制器 英文資料：
Core positioning: SANYO DENKI QS1L03LJ0YP26B is a low-power servo controller that focuses on lightweight and precise control, providing stable driving signals for servo motors in the same frequency range and adapting to the power control needs of compact automation equipment.
Power adaptation: Based on the model "03", it is inferred that it is suitable for servo motors with a rated power of about 0.3 kW, which are suitable for driving lightweight components such as micro transmission modules, precision instrument actuators, and small automation equipment drive units.
Control mode: Supports two basic control modes, position and speed, which can be flexibly switched through parameters to meet the precise positioning (such as component grasping and alignment) and constant speed operation (such as low-speed conveying) requirements of light load equipment.
Power supply specifications: It is expected to be compatible with AC 100-240V wide voltage input, without the need to modify conventional industrial power supply circuits, suitable for different regional workshop power environments, and reduce the difficulty of system wiring.
Signal interaction: Supports pulse command input (such as pulse+direction, CW/CCW), can receive control signals from PLC or motion controller, and provide feedback on motor operation status (such as speed and fault signals), achieving basic closed-loop control.
Protection function: It has overcurrent, overvoltage, undervoltage, overheating, and motor overload protection. In case of abnormalities, it automatically cuts off the output to prevent damage to the controller and motor due to faults, and improve the safety of equipment operation.
Motor adaptation: It is recommended to pair with SANYO DENKI low power servo motors (such as Q series and P series low-power models) with preset parameters to reduce debugging workload and compatibility risks.
Structural features: Adopting a compact design with a small volume, it can be embedded in narrow spaces of equipment control cabinets or installed near motors, shortening wiring distance, reducing signal interference, and optimizing equipment layout.
Typical applications: Used in electronic component assembly machines (such as micro mount mechanisms), precision testing instruments (such as sensor drive units), small medical equipment (such as sample processing and transmission), light load conveyor lines (such as micro part transmission), and other scenarios.
Usage value: Compared with general controllers, it is smaller in size, consumes less energy, and has strong compatibility with motors of the same brand. It can simplify the integration of light load automation systems, reduce overall equipment costs, and ensure driving accuracy and stability.
SANYO DENKI QS1L03LJ0YP26B伺服控制器 產品展示
產品視頻
3.其他產品
MOLAND 203091-511B 集散控制系統
REXROTH VM310 電源模塊
BENTLY 3500/40 176449-01 振動監測位移模塊
4.其他英文產品
A6500-UM control card module
VIBRO-METER MPC4 200-510-074-113 Mechanical Protection Card
YASKAWA USAHEM-02-TE53 AC servo motor
| AMAT 0100-76 | AMAT 0190-45956 | AMAT 0190-15701 |
| AMAT 0100-01489 | AMAT 0190-46025 | AMAT 0190-15735 |
| AMAT 0100-2003 | AMAT 0190-46809 | AMAT 0190-15736 |
| AMAT 0100-00041 | AMAT 0190-46835 | AMAT 0190-15759 |
| AMAT 0100-01864 | AMAT 0190-46837 | AMAT 0190-15828-001 |
| AMAT 0100-00558 | AMAT 0190-47186 | AMAT 0190-15828-002 |
| AMAT 0100-40024 | AMAT 0190-47595 | AMAT 0190-15829 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
