3500/32M模塊是一款振動監測模塊，它是3500系統的一部分，用于工業設備的振動監測和分析，以預防性維護和機器健康監控為目的。

3500/32M 振動監測模塊產品圖片展示

3500/32M 振動監測模塊實物視頻展示

3500/32M 振動監測模塊特點和注意事項

特點

characteristic

Vibration monitoring: The 3500/32M module can monitor the vibration of rotating mechanical equipment, including parameters such as displacement, velocity, and acceleration.

Dual channel design: The module typically has two independent monitoring channels that can simultaneously monitor vibrations in both directions, such as vertical and horizontal.

Advanced diagnostic functions: In addition to basic vibration monitoring, the module may also provide advanced diagnostic functions such as spectrum analysis and trend analysis to help identify potential mechanical faults.

Alarm and Protection: The module can set multiple alarm levels, and once the vibration parameters exceed the preset limits, corresponding alarms will be triggered to protect the equipment from further damage.

Communication capability: The 3500/32M module can integrate with other systems through various communication interfaces (such as RS485, Ethernet, etc.), such as DCS (Distributed Control System), SCADA (Data Acquisition and Monitoring Control System), etc.

User configurable: Users can configure the parameters of the module through software tools, such as alarm thresholds, filter settings, etc., to adapt to different monitoring needs.

matters needing attention

Installation position: Ensure that the module is installed away from vibration sources to avoid unnecessary vibration interference.

Sensor connection: Connect the vibration sensor correctly, ensuring that the signal wires are routed correctly and avoiding electromagnetic interference.

Parameter configuration: Reasonably set monitoring parameters and alarm thresholds based on the characteristics and operating conditions of the monitored equipment.

Maintenance and calibration: Regularly maintain and calibrate modules to ensure the accuracy and reliability of monitoring data.

Environmental adaptability: Ensure that the working environment of the module meets its specified temperature, humidity, and cleanliness requirements, and avoid the impact of extreme environmental conditions on its performance.

Software compatibility: Use the latest software version that is compatible with the module to ensure optimal performance and functionality.

Technical Support: When encountering technical issues or uncertain configurations, promptly contact Bently Nevada's technical support or authorized service provider for assistance.

3500/32M 振動監測模塊相關產品推薦