SCHNNEIDER 140CRA93100 RIO遠程適配器模塊    該模塊是遠程I/O子站單通道模塊，用于在安裝在同一RIO子站背板上的I/O模塊與CPU背板上的RIO頭之間傳輸數據。它通過同軸電纜網絡雙向傳輸數據。

SCHNNEIDER 140CRA93100 RIO遠程適配器模塊  詳情介紹：

1. 施耐德電氣Modicon Quantum系列的140CRA93100 RIO子站適配器模塊是一款備受推崇的綠色優質產品，不含汞，專為極端條件而設計，可擴大覆蓋范圍。其主要特點包括：

2. 單根同軸電纜、300mA的總線電流和3W的功耗。
3. 在模塊頂部正面有一個LED功能，位于型號和型號說明的正下方。當模塊通過上電診斷時，LED功能將顯示綠燈。當模塊在RIO網絡上通信時，Com Act LED顯示綠色。有一個紅色故障LED，指示無法與一個或多個I/O模塊通信。對于通道A上的通信錯誤，錯誤A LED顯示為紅色。最后，故障B LED顯示紅色，與錯誤A一起指示無效的節點地址。
4. 在-13至158華氏度的擴展工作溫度下保持穩定。此外，該涂層提供保護和絕緣，防止高粉塵環境、化學接觸引起的腐蝕、冷凝水滴或濕氣的影響。
5. 該模塊還獲得了ATEX zone 2/22認證，其中包括密集、全面和詳細的測試和檢查過程。按照這些程序，像這種獲得認證的產品也會得到一份報告，概述結果并確認其達到了設定的標準。

6. 該模塊是遠程I/O子站單通道模塊，用于在安裝在同一RIO子站背板上的I/O模塊與CPU背板上的RIO頭之間傳輸數據。它通過同軸電纜網絡雙向傳輸數據。

SCHNNEIDER 140CRA93100 RIO遠程適配器模塊     實物圖片：

SCHNNEIDER 140CRA93100 RIO遠程適配器模塊    實物視頻

SCHNNEIDER 140CRA93100 RIO Remote Adapter Module Details Introduction:

The 140CRA93100 RIO sub station adapter module of Schneider Electric's Modicon Quantum series is a highly respected green and high-quality product, free of mercury, designed specifically for extreme conditions to expand coverage. Its main characteristics include:

Single coaxial cable, 300mA bus current, and 3W power consumption.

There is an LED function on the top front of the module, located directly below the model and model description. When the module passes the power on diagnosis, the LED function will display a green light. When the module communicates on the RIO network, the Com Act LED displays green. There is a red fault LED indicating that communication with one or more I/O modules is not possible. For communication errors on channel A, the error A LED is displayed in red. Finally, the fault B LED displays red, along with error A, indicating an invalid node address.

Maintain stability at extended operating temperatures of -13 to 158 degrees Fahrenheit. In addition, the coating provides protection and insulation to prevent corrosion caused by high dust environments, chemical contact, condensation droplets, or the influence of moisture.

This module has also obtained ATEX zone 2/22 certification, which includes intensive, comprehensive, and detailed testing and inspection processes. According to these procedures, certified products like this will also receive a report outlining the results and confirming that they meet the set standards.

This module is a remote I/O sub station single channel module used to transfer data between I/O modules installed on the same RIO sub station backplane and RIO heads on the CPU backplane. It transmits data bi-directional through a coaxial cable network.

SCHNNEIDER 140CRA93100 RIO遠程適配器模塊    相關產品：

SCHNEIDER 140CPU65260量子單位處理器

SCHNEIDER 140CPU11302 控制器

SCHNEIDER PC-E984-685 Regulator Module

SCHNEIDER 140CRP93200 Remote Input modul