MTL831B 溫度轉換器是一款由MTL（現為HIMA集團的一部分）制造的多路溫度轉換器，主要應用于危險區域的工業過程控制和監測。這款溫度轉換器旨在將現場的溫度信號轉換成可以在安全區域處理的信號格式，同時減少布線成本和提高系統的安全性。

MTL831B 溫度轉換器產品圖片展示

MTL831B 溫度轉換器產品實物視頻展示

MTL831B 溫度轉換器產品特點和注意事項

Features:

Multi channel signal conversion: MTL831B can process multiple temperature signals, such as thermocouple or thermistor signals, and transmit them to a safe area through a single communication line, thereby reducing wiring costs and complexity.

Intrinsic safety explosion-proof design: designed for use in Zone 0 hazardous areas, with intrinsic safety explosion-proof certification, capable of safe use in environments with explosive gas mixtures.

Signal isolation: When MTL831B is used in conjunction with MTL838B receiver, signal isolation can be achieved, enhancing the safety and reliability of the system.

Digital communication: The use of digital communication methods (such as Modbus RTU) to transmit the data of on-site temperature points to the control room improves the accuracy and transmission efficiency of the data.

Space saving: Compared to traditional point-to-point temperature transmitters, MTL831B can significantly reduce the required cabinet space and number of conversion cards.

Cost effectiveness: By reducing the need for cable laying and hardware conversion, the overall installation and maintenance costs have been reduced.

Notes:

Correct selection: When selecting MTL831B, it is necessary to ensure that its technical specifications (such as temperature measurement range, accuracy, communication protocol, etc.) match the application requirements.

Installation environment: Ensure that the installation environment meets the working conditions of MTL831B, including temperature, humidity, and explosion-proof requirements.

Wiring specifications: Follow the wiring guidelines of MTL831B, correctly connect signal and power lines, and avoid electromagnetic interference and signal attenuation.

Maintenance and calibration: Regular maintenance and calibration are carried out to ensure the accuracy of measurements. During maintenance, follow the special operating procedures for intrinsically safe equipment.

System compatibility: Confirm the compatibility of MTL831B with existing control systems and on-site equipment to ensure seamless integration.

Safety regulations: When using MTL831B in hazardous areas, all relevant safety regulations and standards must be strictly followed, including but not limited to explosion-proof and electrostatic discharge protection.

MTL831B 溫度轉換器相關產品推薦