Anybus AB7000-C現場總線轉換器 是一款現場總線轉換器模塊或網關，由HMS Industrial Networks（現為HMS Networks）制造。這款轉換器主要用于將非聯網設備連接到任何主要的現場總線或工業以太網網絡上
Anybus AB7000-C現場總線轉換器 詳情介紹：
Anybus AB7000-C是一款現場總線轉換器模塊或網關，由HMS Industrial Networks（現為HMS Networks）制造。這款轉換器主要用于將非聯網設備連接到任何主要的現場總線或工業以太網網絡上。以下是Anybus AB7000-C的一些主要特點和功能：
- 通信協議轉換：它能在幾分鐘內轉換幾乎所有RS-232/422/485請求/響應或生成/使用協議，例如Modbus RTU、ASCII、DF1等。這意味著您可以使用AB7000-C將使用這些協議的設備連接到其他類型的網絡。
- 便捷的保存/加載功能：AB7000-C具有便捷的保存/加載功能，意味著一個完整的配置可以重復用于許多其他安裝，從而節省了設置和配置的時間。
- 任意總線配置管理器：這款轉換器配備了“任意總線配置管理器”，具有靈活的串行幀構建功能，使得用戶可以更靈活地配置和管理設備。
- 雙端口交換式以太網：帶有雙端口交換式以太網的版本允許菊花鏈連接，無需外部交換機，進一步簡化了網絡設置。
- DIN導軌安裝：AB7000-C設計為DIN導軌安裝，這使得它在工業環境中易于安裝和集成。
- 電源和溫度范圍：該轉換器采用24 VDC供電，并能在0至55攝氏度的溫度范圍內正常工作，適用于大多數工業環境。
Anybus AB7000-C在現場總線通信中發揮著重要作用，特別是在需要將舊設備或不支持現代通信協議的設備集成到現代工業自動化系統中時。
Anybus AB7000-C現場總線轉換器 實物圖片：
Anybus AB7000-C現場總線轉換器 實物視頻
Details of Anybus AB7000-C fieldbus converter:
Anybus AB7000-C is a fieldbus converter module or gateway manufactured by HMS Industrial Networks (now HMS Networks). This converter is mainly used to connect non networked devices to any major fieldbus or industrial Ethernet network. The following are some of the main features and functions of Anybus AB7000-C:
Communication protocol conversion: It can convert almost all RS-232/422/485 requests/responses or generate/use protocols in a few minutes, such as Modbus RTU, ASCII, DF1, etc. This means that you can use AB7000-C to connect devices using these protocols to other types of networks.
Convenient save/load function: The AB7000-C has a convenient save/load function, which means that a complete configuration can be reused for many other installations, saving time on setup and configuration.
Arbitrary Bus Configuration Manager: This converter is equipped with the Arbitrary Bus Configuration Manager, which has flexible serial frame construction function, allowing users to configure and manage devices more flexibly.
Dual port switched Ethernet: The version with dual port switched Ethernet allows for daisy chain connections without the need for external switches, further simplifying network settings.
DIN rail installation: The AB7000-C is designed for DIN rail installation, making it easy to install and integrate in industrial environments.
Power and temperature range: The converter is powered by 24 VDC and can operate normally in a temperature range of 0 to 55 degrees Celsius, suitable for most industrial environments.
Anybus AB7000-C plays an important role in fieldbus communication, especially when integrating old equipment or devices that do not support modern communication protocols into modern industrial automation systems.
Anybus AB7000-C現場總線轉換器 相關產品：
ABB LD800HSE 3BDH000320R02 連接控制器
ABB NDCU-33CX 3AUA0000052751 I/O Module
ABB APBU-44C 64669982 Fiber Distribution
| PC843-XYZ-A | AMAT 0100-02734 | HESG446212R0001] 70AA01A-E |
| PC843-001-T | AMAT 0100-00455 | HESG447388R0001] 70AA02B-E |
| PC844-XYZ-F | AMAT 0100-91040 | HESG447224R0002 70AB01C-ES |
| PCE845-XYZ-A | AMAT 0100-00054 | HESG446933R0002 70AB02B-E |
| PCE833-001-N | AMAT 0100-35207 | 57390001-7 D5001 SB5032 ABB |
| PC832-XYZ-T | AMAT 0100-00146 | 57120001-P DSAI130 |
