EMERSON  5X00481G01 數字量輸入模塊   傳感器能夠提供高精度的軸振動數據，這對于準確分析設備狀態(tài)至關重要。

EMERSON  5X00481G01 數字量輸入模塊    詳情介紹：

1. EMERSON 5X00481G01 數字量輸入模塊是一款功能強大的數字輸入設備，具有以下主要特點和功能：

2. 電纜選擇與安裝：為了減少動力電纜輻射電磁干擾，尤其是變頻裝置饋電電纜，建議使用銅帶鎧裝屏蔽電力電纜。不同類型的信號應分別由不同電纜傳輸，信號電纜應按傳輸信號種類分層設置，避免用同一電纜的不同導線同時傳送動力電源和信號。此外，應避免信號線與動力電纜靠近平行設置，以減少電磁干擾。
3. 安全特性：該模塊支持安全扭矩關閉（STO）功能，該功能符合EN 61800-5-2:2007、EN/ISO 13849-1:2008、IEC 61508和EN 62061:2005等標準。STO功能用于在需要拆除電源以防止意外啟動的場合中，實現不受控制的停止。但請注意，STO功能不會斷開主電路和輔助電路與驅動器的電壓，因此在對驅動器或電機的電氣部件進行維護工作時，需要將驅動系統與主電源隔離。
4. 電磁干擾處理：為了減少電磁干擾的影響，除了電纜選擇外，還可以在硬件和軟件方面采取抗干擾措施。例如，在信號接入計算機前，可以在信號線與地間并接電容以減少共模干擾；在信號兩極間加裝濾波器可減少差模干擾。

5. 總之，EMERSON 5X00481G01 數字量輸入模塊是一款功能全面、安全可靠的數字輸入設備，適用于各種工業(yè)自動化和過程控制領域。

6. EMERSON  5X00481G01 數字量輸入模塊     實物圖片：

EMERSON  5X00481G01 數字量輸入模塊   實物視頻

EMERSON 5X00481G01 Digital Input Module Details Introduction:

The EMERSON 5X00481G01 digital input module is a powerful digital input device with the following main features and functions:

Cable selection and installation: In order to reduce the radiation electromagnetic interference of power cables, especially the feeding cables of frequency conversion devices, it is recommended to use copper tape armored shielded power cables. Different types of signals should be transmitted through different cables, and signal cables should be layered according to the type of transmission signal to avoid using different wires of the same cable to simultaneously transmit power supply and signals. In addition, signal lines should be avoided from being placed parallel to power cables to reduce electromagnetic interference.

Safety features: This module supports the Safety Torque Off (STO) function, which complies with standards such as EN 61800-5-2:2007, EN/ISO 13849-1:2008, IEC 61508, and EN 62061:2005. The STO function is used to achieve uncontrolled stopping in situations where the power supply needs to be removed to prevent accidental start-up. However, please note that the STO function does not disconnect the voltage between the main and auxiliary circuits and the driver. Therefore, when performing maintenance work on the electrical components of the driver or motor, it is necessary to isolate the drive system from the main power supply.

Electromagnetic interference treatment: In order to reduce the impact of electromagnetic interference, in addition to cable selection, anti-interference measures can also be taken in hardware and software. For example, before the signal is connected to the computer, a capacitor can be connected in parallel between the signal line and ground to reduce common mode interference; Installing a filter between the two poles of the signal can reduce differential mode interference.

In summary, the EMERSON 5X00481G01 digital input module is a comprehensive, safe and reliable digital input device suitable for various industrial automation and process control fields.

EMERSON  5X00481G01 數字量輸入模塊  相關產品：

EMERSON PR6426010-140+CON021916-200 comm

Emerson 5X00241G01 Ovation processor mod

EMERSON 5X00489G01控制模塊

Emerson 1C31222G01控制模塊