ABB AO801模擬量通訊模塊  通常用于工業自動化系統中，用于實現模擬量信號的輸入輸出和通信。

ABB AO801模擬量通訊模塊  詳情介紹：

AO801模擬量輸出模塊并非直接稱為“通訊模塊”，但它確實與通信和接口有關。以下是關于AO801模擬量輸出模塊的一些關鍵信息：

1. 功能與特點：AO801模擬量輸出模塊具有8個單極性模擬輸出通道，通常用于AC500CPU的本地?cái)U(kuò)展模塊，與接口模塊如DC505-FBP/DC551-CS31組合使用，實現分布式擴展。它支持0/4-20mA或0/4-20mA的電流輸出，具有短路保護和模擬輸出OSP（輸出狀態保護）功能，能在檢測到錯誤時將輸出設置為預定狀態。
2. I/O模塊集成：AO801模擬量輸出模塊集成了PLC（可編程邏輯控制器）的I/O電路。輸入暫存器反映輸入信號狀態，而輸出點反映輸出鎖存器狀態。在模擬量輸出的情況下，該模塊將數字信號轉換為模擬信號（如電流）輸出。
3. 應用場景：AO801模擬量輸出模塊常用于工業自動化系統中，與各種傳感器和執行器配合，實現連續變化的物理量的測量和控制，如溫度、壓力、流量等。

雖然AO801本身不是直接用于通信的模塊，但它作為PLC系統的一部分，可以通過與其他通信模塊或設備的配合，實現與上位機、其他PLC或遠程監控系統的通信。這樣，AO801模擬量輸出模塊可以將采集到的模擬信號轉換為數字信號，并通過通信接口發送給上位機或其他設備，實現數據的遠程監控和控制。

ABB AO801模擬量通訊模塊 實物圖片：

ABB AO801模擬量通訊模塊  實物視頻

ABB AO801 Analog Communication Module Details Introduction:

The AO801 analog output module is not directly referred to as a "communication module," but it is indeed related to communication and interfaces. Here are some key information about the AO801 analog output module:

Function and characteristics: The AO801 analog output module has 8 unipolar analog output channels and is usually used as a local expansion module for AC500 CPUs. It is combined with interface modules such as DC505-FBP/DC551-CS31 to achieve distributed expansion. It supports current output of 0/4-20mA or 0/4-20mA, with short-circuit protection and analog output OSP (output state protection) function, and can set the output to a predetermined state when an error is detected.

I/O module integration: The AO801 analog output module integrates the I/O circuit of a PLC (Programmable Logic Controller). The input register reflects the state of the input signal, while the output point reflects the state of the output latch. In the case of analog output, this module converts digital signals into analog signals (such as current) for output.

Application scenario: The AO801 analog output module is commonly used in industrial automation systems, in conjunction with various sensors and actuators, to achieve continuous measurement and control of physical quantities such as temperature, pressure, flow rate, etc.

Although AO801 itself is not a module directly used for communication, as a part of the PLC system, it can achieve communication with the upper computer, other PLCs, or remote monitoring systems by cooperating with other communication modules or devices. In this way, the AO801 analog output module can convert the collected analog signals into digital signals and send them to the upper computer or other devices through communication interfaces, achieving remote monitoring and control of data

ABB AO801模擬量通訊模塊 相關產品：

ABB LD800HSE 3BDH000320R02 連接控制器

ABB SCYC51020 58052582G脈沖控制板

ABB NDCU-33CX 3AUA0000052751 I/O Module

ABB APBU-44C 64669982 Fiber Distribution