ABB     FAU810 火焰分析裝置  是一款基于微處理器的放大設備，具有同時接收兩個檢測器探頭信號的能力。每個探頭信號被送入獨立的信道，每個信道又擁有其自己的火焰繼電器以及4~20mA的模擬輸出。這種設計確保了火焰檢測的準確性和可靠性。

ABB     FAU810 火焰分析裝置    詳情介紹：

FAU810火焰分析裝置是一款基于微處理器的放大設備，具有同時接收兩個檢測器探頭信號的能力。每個探頭信號被送入獨立的信道，每個信道又擁有其自己的火焰繼電器以及4~20mA的模擬輸出。這種設計確保了火焰檢測的準確性和可靠性。

FAU810火焰分析裝置能夠?qū)崟r(shí)地反映火焰燃燒的真實狀況，通過顯示瞬時火焰的閃爍頻率、輻射強度以及火焰品質等數據，用戶可以根據這些數據精確地設置參數，既可以有效監測火焰，又能防止偷看現象。此外，該裝置還具有智能的自動選擇功能，可以根據不同的燃料工況自動選擇參數，無需像傳統火檢那樣由于運行工況變化和燃料的變化而不斷“學習”并頻繁調整參數。

在安全性方面，F(xiàn)AU810具有卓越的自診斷功能，能夠持續運行以保證燃燒器控制的安全可靠。當邏輯判斷存在不安全狀況時，如無火焰狀況，裝置會發出信號。

總的來說，F(xiàn)AU810火焰分析裝置是一款功能強大、性能穩定的火焰檢測與分析設備，適用于各種工業鍋爐和燃燒器的火焰檢測與控制，有助于提升設備的安全性和運行效率。

請注意，具體的安裝、配置和使用方法可能因應用環境和設備配置的不同而有所差異。因此，在使用FAU810火焰分析裝置時，建議遵循設備制造商提供的操作指南和安全規范，以確保設備的正常運行和人員的安全。

ABB     FAU810 火焰分析裝置   實物圖片：

ABB     FAU810 火焰分析裝置    實物視頻

Details of ABB FAU810 flame analysis device:

The FAU810 flame analysis device is a microprocessor based amplification device with the ability to simultaneously receive signals from two detector probes. Each probe signal is fed into an independent channel, and each channel has its own flame relay and 4-20mA analog output. This design ensures the accuracy and reliability of flame detection.

The FAU810 flame analysis device can reflect the real situation of flame combustion in real time. By displaying instantaneous flame flicker frequency, radiation intensity, and flame quality data, users can accurately set parameters based on these data, which can effectively monitor flames and prevent peeping phenomena. In addition, the device also has an intelligent automatic selection function, which can automatically select parameters according to different fuel conditions, without the need for traditional flame detection to constantly "learn" and frequently adjust parameters due to changes in operating conditions and fuel.

In terms of safety, FAU810 has excellent self diagnostic function, which can continuously operate to ensure the safety and reliability of burner control. When the logic determines that there is an unsafe situation, if there is no flame condition, the device will send a signal.

Overall, the FAU810 flame analysis device is a powerful and stable flame detection and analysis equipment, suitable for flame detection and control of various industrial boilers and burners, helping to improve equipment safety and operational efficiency.

Please note that the specific installation, configuration, and usage methods may vary depending on the application environment and device configuration. Therefore, when using the FAU810 flame analysis device, it is recommended to follow the operating guidelines and safety regulations provided by the equipment manufacturer to ensure the normal operation of the equipment and the safety of personnel.

ABB     FAU810 火焰分析裝置    相關產品：

ABB LD800HSE 3BDH000320R02 連接控制器

ABB SCYC51020 58052582G脈沖控制板

ABB NDCU-33CX 3AUA0000052751 I/O Module

ABB APBU-44C 64669982 Fiber Distribution